ISO 7637-3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
n DUT, ICC (BCI Clamp) and Control/Peripheral have to be placed on a insulating block (height 50mm) above the GND-plane.
n An adapter is connected to the output the UCS 200N and the output of adapter is connected to BCI clamp using a coax cable of 50cm max.
n The Adapter must be matched to the clamp
n The battery cables are connected to the DUT directly.
n If the auxiliary equipment (control/peripheral) is grounded locally this local GND-connection shall be excluded from the ICC.